User`s manual

5. Outlook

RPM-Rear Panel

NT SERVER PORTS A-H: Provides controlled shutdown for NT server. Port A

controls receptacle A; Port B controls receptacle B, etc.

RPM-LED Table

RPM LED Table

LED ON OFF Flashing

Green

The momentary

switch is disabled

and the output

receptacle is set

for remote control.

The momentary

switch is active

and the receptacle

may be turned on

or off by pressing

and releasing the

switch

Pressing and holding

the momentary switch

for three seconds will

change the state from

remote to local control.

Red

The receptacle is

on and providing

power to devices.

The receptacle is

off.

The receptacle has an

internal fault.

Yellow

Indicates the RPM

ID number. The

RPM master (the

RPM with the

SNMP card) will

display all the

connected RPMs.

It means the RPM

ID is RPM00.