Specifications

Draper Prison Wasatch & Oquirrh Intercom & Paging System Remodel 4-21-2014
OVERCURRENT PROTECTIVE DEVICES 260180 – 1
SECTION 260180 - OVERCURRENT PROTECTIVE DEVICES
PART 1 – GENERAL
1.1 RELATED DOCUMENTS:
A. Drawings and general provisions of Contract, including General and Supplementary Conditions
and Division-1 Specification Sections, apply to work of this section.
B. This section is a Division 26 General Provisions section, and is part of each Division 26, 27, and
28 section making reference to overcurrent protective devices.
1.2 DESCRIPTION OF WORK:
A. Extent of overcurrent protective devices is indicated by drawings and schedules and is specified
herein.
B. Type of overcurrent protective devices in this section include the following:
1. Molded Case Circuit Breakers
1.3 QUALITY ASSURANCE:
A. STANDARDS: Refer to Section 260001 - Electrical General Provisions as applicable.
B. SUBMITTALS:
1. SHOP DRAWINGS: Submit manufacturer's data on overcurrent protective devices
including specifications, time-current trip characteristics curves, mounting requirements,
installation instructions, etc. Submit dimensioned drawings of overcurrent protective
devices.
2. Equipment Room Layouts: Submit dimensioned drawings of all equipment rooms
indicating spatial relationships to other proximate equipment. Insure that all code
required clearances are maintained.
PART 2 – PRODUCTS
2.1 GENERAL:
A. Provide overcurrent protective devices and ancillary components of types, sizes, ratings, and
electrical characteristics indicated. Provide enclosures in NEMA ratings as indicated and
suitable for applications.
2.2 MOLDED CASE CIRCUIT BREAKERS:
A. MANUFACTURERS: Subject to compliance with all requirements, provide molded case circuit
breakers from one of the following:
1. Cutler-Hammer
2. General Electric
Bid DA14027DFCM
5/30/2014 2:08 PM p. 87