Specifications

Draper Prison Wasatch & Oquirrh Intercom & Paging System Remodel 4-21-2014
ELECTRICAL CONNECTIONS FOR EQUIPMENT 260070 – 1
SECTION 260070 – ELECTRICAL CONNECTIONS FOR EQUIPMENT
PART 1 – GENERAL
1.1 RELATED DOCUMENTS:
A. Drawings and general provisions of Contract, including General and Supplementary Conditions
and Division-1 Specification Sections, apply to work of this section.
B. This section is a Division 26 General Provisions section, and is part of each Division 26, 27, and
28 sections making reference to electrical connections.
1.2 DESCRIPTION OF WORK:
A. Extent of electrical connections for equipment include all final electrical connections for all
equipment having electrical requirements including, but not necessarily limited to the following:
1. Equipment specified under all divisions of the contract. Refer to other
divisions for specific electrical requirements.
1.3 QUALITY ASSURANCE:
A. STANDARDS: Refer to Section 260001 – Electrical General Provisions as applicable.
B. SHOP DRAWINGS: Not required.
PART 2 – PRODUCTS
2.1 GENERAL:
A. Provide all materials for electrical connections including, but not necessarily limited to the
following:
1. Raceways
2. Fittings
3. Conductors
4. Cords
5. Cord caps
6. Wiring devices
7. Pressure connectors
8. Lugs (CU-AL)
9. Electrical insulating tape
10. Heat-shrinkable tubing
11. Cable ties
12. Wire nuts
13. Other items and accessories as required.
B. Crimp on or slip-on type splicing materials designed to be used without wire stripping are not
acceptable.
Bid DA14027DFCM
5/30/2014 2:08 PM p. 64