Specifications

Draper Prison Wasatch & Oquirrh Intercom & Paging System Remodel 4-21-2014
ELECTRICAL GENERAL PROVISIONS 260001 – 1
SECTION 260001 – ELECTRICAL GENERAL PROVISIONS
PART 1 – GENERAL
1.1 RELATED DOCUMENTS:
A. Drawings and general provisions of Contract, including General and Supplementary Conditions
and Division-1 Specification sections, apply to work of this section.
B. Architectural, Structural, Mechanical and other applicable documents also apply to work of this
section.
1.2 DESCRIPTION OF WORK:
A. The contract documents indicate the extent of electrical work. Provide all labor, materials,
equipment, supervision and service necessary for a complete electrical system as described in
divisions 26, 27, and 28.
1.3 RELATED SECTIONS:
A. Other Divisions relating to electrical work apply to the work of this section. See other applicable
Divisions including, but not necessarily limited to:
1. Division 1 – General and Supplementary Conditions
2. Division 2 – Existing Conditions
3. Division 3 – Concrete
4. Division 5 – Metals
5. Division 6 – Wood, Plastics, and Composites
6. Division 7 – Thermal and Moisture Protection
7. Division 8 – Openings
8. Division 9 – Finishes
9. Division 21 – Fire Suppression
10. Division 22 – Plumbing
11. Division 23 – Heating Ventilating and Air Conditioning
12. Division 27 – Communications
13. Division 28 – Electronic Safety and Security
1.4 INTERPRETATIONS OF DRAWINGS AND SPECIFICATIONS:
A. Prior to bidding the job, submit requests for clarification in writing to the Architect/Engineer prior
to issuance of the final addendum.
B. After signing the contract, provide all materials, labor, and equipment to meet the intent,
purpose, and function of the contract documents.
C. The following terms used in Division 26, 27, and 28 documents are defined as follows:
1. "Provide" - Means furnish, install, and connect, unless otherwise indicated.
2. "Furnish" - Means purchase new and deliver in operating order to project site.
3. "Install" - Means to physically install the items in-place.
4. "Connect" - Means make final electrical connections for a complete operating piece of
equipment. This includes providing conduit, wire, terminations, etc. as applicable.
Bid DA14027DFCM
5/30/2014 2:08 PM p. 57