User`s manual

English

C. The Rackmount Configuration has mounting brackets for a standard 19"

(46.5cm) rack. Mounting brackets to fit a 23" (59.2cm) standard rack are

also available. The screws for mounting the Battery Pack(s) to the rack are

not included (screw size varies with rack size). The installation of the

mounting brackets, is as follows: The Rackmount kit includes two mounting

brackets and eight retaining screws. Locate the mounting bracket screw

holes on the side panels of the Battery Pack, at the front of the Battery

Pack. Align the mounting bracket with the mounting bracket screw holes

and attach the mounting bracket with the retaining screws. Mount the

Battery Pack(s) and the UPS (see the UPS User's Manual) into the rack.

Go to step #6 on page 14 and finish the rest of this procedure to install the

Battery Pack(s).

WARNING: Use two or more people when installing the Battery Pack(s)

and the UPS into the rack (see the UPS User's Manual for rack

mounting the UPS). Use caution; these units are extremely heavy.

Do not move the rack after the units have been installed. The rack

maybe unstable due to the weight distribution.

D. The Wall Mount Configuration allows the user to mount the Battery Pack(s)

and the UPS (see the UPS User's Manual for installation) on the wall. A wall

mount bracket kit available for both the Battery Pack(s) and the UPS. The kit

includes two mounting brackets, twelve retaining screws, four bolts, one drill

bit and the template for the bolt holes. Use CAUTION: the Battery Pack(s)

are extremely heavy. The Battery Pack's side panels

have mounting bracket

screw holes for attaching the wall mounting brackets.