Specifications

Unistar Sx Series UPS
Form No. 003-2077
3
Primary Power Switch: Press and release the ON/OFF button to
turn the unit ON or OFF.
Normal Mode Icon: This icon will illuminate when the utility power
is within safe operating range.
Battery Mode Icon: This icon will illuminate when the Utility power
is outside safe operating range and the unit is operating in the
battery mode.
Bypass Mode Icon: This icon will illuminate when the unit is in
bypass mode and you do not have battery backup protection.
Unit Fault Icon: The Fault icon illuminates when the UPS has
detected an internal fault. (see section 5)
FRONT PFRONT P
FRONT PFRONT P
FRONT P
ANELANEL
ANELANEL
ANEL
(LCD Units) (LCD Units)
(LCD Units) (LCD Units)
(LCD Units)
22
22
2
CONTROLS CONTROLS
CONTROLS CONTROLS
CONTROLS
AND INDICAAND INDICA
AND INDICAAND INDICA
AND INDICA
TT
TT
T
ORSORS
ORSORS
ORS
Unit Fault Icon: This icon and error code will illuminate when the self diagnostics
are able to determine the problem.
Unit Charger Icon: This icon will illuminate when the unit is charging the batteries.
Unit Overload Icon: This icon will illuminate when the unit load has exceed the rating of
the UPS. The UPS will transfer to bypass mode if the overload is not removed.
Estimated Time Remaining icons: These combination of LCD icons will
illuminate when selected and the UPS is operating in the battery mode.
The first time icon will appear as ">" if the estimated time remaining is
greater than ten (10) minutes. This symbol will turn off when the estimated
time remaining is less than 10 minutes and the remaining time will appear
in the display.
Unit Audible Alarm Icon: This alarm will illuminate when audible alarm is silenced.