Spec Sheet

More Models to Maximize Your Value
Minuteman's EnterprisePlus LCD Series UPSs come in standard and extended
runtime, giving you the best value for your needs.
Standard runtime models (RT2U) feature the same specications and power
output properties without extended runtime capability.
Extended runtime models (RTXL2U) add optional XL and EXL battery packs to
increase runtimes dramatically. 208V also available.
Electrical Characteristics
Output Power Factor
All EnterprisePlus LCD models feature a 0.8 or greater power
factor, which increases the watt capacity of the units. Offering
larger capacities in smaller UPS VA sizes reduces the overall cost
of the UPS solution for a specic load requirement.
Output Voltage
All units in the EnterprisePlus LCD Series produce an electrical
signal that does not vary from nominal voltage by more than 5%.
Tightly regulating the output voltage increases the quality of power
to connected equipment adding to its life expectancy, which lowers
the total cost of ownership to users.
Total Harmonic Distortion (THD)
THD is the distortion of a normal AC electrical signal commonly
caused when UPS connected loads near the capacity of the units.
This distortion can cause internal heat to build up on sensitive
equipment not designed to allow for these altered AC signals. The
EnterprisePlus LCD UPS maintains an output AC signal, at all
times and with linear loads, within 2% of a true sine wave.
Output Receptacle Control
Three banks of receptacles (one always-on for critical devices,
two controllable via SentryHD™ and an SNMP card) allow users
to increase runtime for more critical devices during an extended
blackout.
Through the use of Minuteman’s SentryHD software or
communication with the UPS through an Ethernet connection,
users can either turn on, off, or reset each segment independently.
By reducing the connected load draw on the UPS, the runtime of
critical devices can be extended signicantly.
Communication Features
The EnterprisePlus LCD UPS provides users with the ability to
communicate with the UPS simultaneously through three separate
protocols: RS-232, USB and Ethernet. Users can directly connect
and manage the UPS from multiple stand-alone, or networked
computers. The UPS can provide detailed monitoring and
management to many various environments.
Other Features
RoHS 2 Compliancy
Para Systems developed the EnterprisePlus LCD Series to
be compliant with the updated RoHS2 Directive as dened by the
European Economic Union directive on the reduction of hazardous
substances in electronic equipment: 2011/65/EU.
Energy Star Certied
As a participant in the EPA’s Energy Star program, Para
Systems developed the EnterprisePlus LCD Series
1
to meet the
highest efciency standards possible in order to maximize the
saving of user’s energy consumption.
Manual and Automatic Self-Testing
The EnterprisePlus LCD UPS is designed to proactively notify
users of any impending faults or failures with the UPS. This allows
for preemptive repair or replacement of components or batteries
preventing unexpected downtime caused by the UPS.
Dedicated EPO Port
This direct access port allows users to perform an immediate
remote shutdown of the UPS in cases of emergency or when
access to the UPS is restricted or inconvenient.
Minuteman EnterprisePlus LCD Series UPS2
Rear View of E750RTXL2U
1
1500, 2000, and 3000VA models only
• Standard Runtime:
E750RT2U, E1000RT2U, E1500RT2U,
E2000RT2U, E3000RT2U
• Extended Runtime (XL):
E750RTXL2U, E1000RTXL2U, E1500RTXL2U,
E2000RTXL2U, E3000RTXL2U
• 208V (T):
E1500RTXLT2U, E3000RTXLT2U
1
2
3
4
5 6 7
9
11
10
12
13
1
2
3
4
5
6
7
9
10
8
12
13
1 Remote EPO Connection
2 USB Comm. Port
3 RS-232 Comm. Port
4 Output Voltage Dipswitch
5 Network/Phone Surge Protection
6 External Battery Connection
7 SNMP Option Slot
8 L5-20R 20 Amp Locking Output
1
9 Output Receptacles (Load 1)
10 Output Receptacles (Load 2)
11 Output Receptacles (Load 3)
2
12 Input Circuit Breaker
13 10 ft. Power Cord
Rear View of E2000RTXL2U
1
2000VA Model Only, L5-30R on 3000VA
2
750, 1000, & 1500VA Models Only