User guide

Parts and Instruction Manual
Page 12
Bill of Material 470100
ITEM PART QTY DESCRIPTION
1 11-145 1 Squeegee Gum Rubber
2 430073 1 Gasket Diecut PS Back
3 430074 6 Adjusting Nut 17B/E
4 430076 2 Nylon Squeegee Insert
5 430078 1 U Profile
6 430079 1 Casting Squeegee Asy
7 430085 2 Squeegee Bumper Wheel
8 470105 1 Squeegee Arm Weldment
9 470106 1 Foot Pedal Tip/Pour
10 710992 2 BLT-Shoulder 1/2 x 1.25 x 3/8
11 711375 2 Nut-Nyloc 3/8-16 1/2 Nut
12 711377 2 Nut-Nyloc 1/4-20
13 711420 3 Nut-Hex JAM 5/16-18 STPL
14 711505 2 WSR-Flt 1/4
15 711506 2 WSR-Flt 5/16 (Narrow) STPL
16 711509 4 WSR-Flt 1/2
17 711524 4 WSR-Wave .52 x .87 x .01
18 711594 4 WSR-Flt .56 x .88 x .03 Nickel
19 711643 2 Pin-Roll .187 x 1.12 PLT
20 711713 4 Ret Ring-E Ext .50
21 712041 2 BLT-Shoulder 1/4-20 x .44 x .37
22 712091 1 BLT-Shoulder 3/8 x 1.5
23 712517 4 SCR-MC FL HD 8/32 x 1 SS
24 750139 1 Squeegee Mtg. Bkt. Asy
25 750140-1 1 Vac Hose Asy w/new cuff
26 750689 2 Stud, Adjusting
27 762084 1 Spring-Ext
28 762256PLT 2 Nut Adj. LH Zinc PLT
29 762257PLT 2 Nut Adj. RH Zinc Dicromat
30 829052 2 Bushing-FLG .312 x .437 x .31 NYL
Optional Squeegee Assembly BOM
ADJUSTMENTS
Angle of squeegee assembly can be adjusted if needed, by loosening nut 13 and turning item 26.
Both sides may need adjusting so that squeegee blade is parallel to floor in down position.