User Manual

Manual / Manuel / Handbuch /

manuaalinen / Met de hand /

podręcznik / brugervejledning /

マニュアル

Inside the box

Magnetic

mounting plate

Security stickerCharging cable

(USB-C)

Plug & screwPoint

Used with mounting plate

when surface is rough

1. Set up Point from your phone

2. Mount Point to the ceiling

Download the app from app.minut.com and follow the

instructions inside the app to install Point before mounting

Point to the ceiling.

Remove tape and attach the magnetic mounting plate to the

ceiling. Use the wall plug and screw if your ceiling has a rough

texture.

Point detects movement below its mounting position. It’s

recommended to mount Point where people frequently move,

for example in the hallway.

Get started

Main button

Charge indicator

Green solid Fully charged

Green blink Charging

Red blink Incorrect charging

Charge port

On/O

Reset

Short press Reboot

10 sec Factory reset

minut.com/manual

PAGE 1
Inside the box Point Charging cable Magnetic mounting plate (USB-C) Plug & screw Security sticker Used with mounting plate when surface is rough Get started 1. Set up Point from your phone 2. Mount Point to the ceiling Download the app from app.minut.com and follow the instructions inside the app to install Point before mounting Point to the ceiling. Remove tape and attach the magnetic mounting plate to the ceiling. Use the wall plug and screw if your ceiling has a rough texture.
PAGE 2
Join the facebook group ‘PointUser’ to discuss Point! Got a question? minut.com/support General maintenance Only clean Point with a dry cloth. Do not wash or submerge the Point under water. Use indoors only (0 to 40°C/32°F to 104°F) and avoid exposure to direct sunlight for prolonged periods of time. Exposure to prolonged high humidity may have negative effects on sensors. Low temperatures may affect battery performance negatively. Condensation may damage the device.