Installation manual

www.baldormotion.com
Specifications 7-1MN1933
7.1 Introduction
This section provides technical specifications of the NextMove PCI-2
7.1.1 Input power and mechanical specifications
Description Value
Input power
(from host PC)
+3.3 V at 1000 mA
+5 V at 350 mA
±12 V at 250 mA
Additional current will be required when powering the
encoders from the host PC’s +5 V supply . See section 4.5.2.
Input power
(from customer supply)
+12 V to +24 V at 1200 mA
Power consumption 15 W (PCI-2 card only)
Weight Approximately 305 g (0.67 lb)
Nominal overall
dimensions
Standard 7 in PCI card
175 mm (6.88 in) long x 106.7 mm (4.20 in) high.
The host PC must have a spare 7 inch PCI card slot. Additional slots will be required to
accommodate expansion cards. The PC must be an AT type - the card cannot be fitted into
MCA type machines. The card dimensions conform to the PCI standard except that it cannot
be fitted with a Micro Channel bracket.
7.1.2 Analog inputs (X6)
Description Unit Value
Type Single ended or differential
Common mode volta ge range VDC ±10
Input impedance kΩ >5
Input ADC resolution bits 12
(includes sign bit)
Equivalent resolution (±10 V input) mV ±4.9
Sampling interval μs 400
7 Specifications
7