Installation manual

www.baldormotion.com
Operation 5-35MN1933
4. On the main menu, choose File, Save File. Locate a folder, enter a filename and click Save.
5.1 1.1 Loading saved information
1. In the Toolbox, click the Edit & Debug icon.
2. On the main menu, choose File, Open File...
Locate the file and click Open.
A Startup block should be included in every Mint program, so that whenever a program is
loaded and run the NextMove PCI-2 will be correctly configured. Remember that every
drive/motor combination has a slightly different response. If the same program is used on
a different NextMove PCI-2 installation, the Startup block will need to be changed.