Installation manual

www.baldormotion.com
2-4 Introduction MN1933
2.3 Units and abbreviations
The following units and abbreviations may appear in this manual:
V Volt (also V AC and VDC)...............
WWatt..............
A Ampere...............
Ω Ohm...............
mΩ milliohm.............
μF microfarad..............
pF picofarad..............
mH millihenry.............
Φ phase...............
ms millisecond..............
μs microsecond..............
ns nanosecond..............
mm millimeter.............
m meter...............
in inch...............
ft feet...............
lbf-in pound force inch (torque)............
N·m Newton meter (torque).............
ADC Analog to Digital Converter............
ASCII American Standard Code for Information Interchange...........
AWG American Wire Gauge............
CAL CAN Application Layer............
CAN Controller Area Network............
CDROM Compact Disc Read Only Memory.........
CiA CAN in Automation International Users and Manufacturers Group e.V..............
CTRL+E on the PC keyboard, press Ctrl then E at the same time..........
DAC Digital to Analog Converter............
DS301 CiA CANopen Application Layer and Communication Profile..........
DS401 CiA Device Profile for Generic I/O Devices..........
DS403 CiA Device Profile for HMIs..........
EDS Electronic Data Sheet............
EMC Electromagnetic Compatibility............
HMI Human Machine Interface.............
ISO International Standards Organization.............
Kbaud kilobaud (the same as Kbit/s in most applications)...........
LCD Liquid Crystal Display............
MB megabytes.............
Mbps megabits/s...........
(NC) Not Connected............
RF Radio Frequency..............