Installation manual

www.baldormotion.com
EC Declaration B-1MN1933
EC Declaration of Incorporation
Date: 24/02/05 Ref: DE00025-000
Manufact urer: Baldor UK Limited
Address
: Mint Motion Centre, Hawkley Drive, Bristol Distribution Centre, Bristol, BS32 0BF, United Kingdom
Hereby declare that the product:
NextMove PCI-2 Multi-Axis Motion Controller, being one of:
PCI201-XXX
(where XXX = product variant)
when used with expansion card being one of: PCI002-5XX (Where XX = Produc t Variant)
and cable being one of: CBL021-501, CBL021-502, CBL021-503
and breakout being one of: PCI003-501, PCI003-502
is intended to be incorporated into machinery to constitute machinery covered by the EEC directive 98/37/EC, and
89/336/EEC; does therefore not in every respect comply with the provisions of these directives;
and that the protection requirements of the following Council Directives and relevant Harmonised European s tandards
must be applied:-
The Electromagnetic Compatibility Directive 89/336/ECE
and its amending directives:
User must follow the guidance given in this directive to meet all necessary protection requirements. Must be installed and
operated with reference to the instructions in the product manual MN1933. User must follow the guidance given in
harmonised standards EN61000-6-2 (Generic Industrial Immunity) and EN61000-6-3 (Generic Light Industrial / residential
Emissions ) to meet necessary protection requirements of this directive.
Standard
: Title:
Comments:
EN61000-4-4 : 1995 EFT/Bursts
Unit has been tested & passed these basic standards.
EN61000-4-2 : 1995 Electrostatic Discharge
Passed: E.F.T, Level 4, E.S.D, Level 3
The Machinery Directive 98/37/EC and its amending directives:
User must follow the guidance given in this directive to meet all necessary protection requirements. All instructions,
warnings & safety information of the product manual MN1933 must be adhered to. User must follow the guidance given in
harmonised standard EN60204-1 (Safety of Machinery) to meet necessary protection requirements of this directive.
and furthermore declare that it may not be put into service before the mac hinery in which it will be incorporated is declared
to comply with the provisions of directive 98/37/EC & 89/336/EEC as amended.
Signed:
Dr. Gerry Boast
Engineering Manager
C EC Declaration
C