Installation manual

www.baldormotion.com
Introduction 2-3MN1933
2.2 Receiving and inspection
When you receive your NextMove PCI-2, there are several things you should do immediately:
1. Check the condition of the packaging and report any damage immediately to the carrier
that delivered your NextMove PCI-2.
2. Remove the NextMove PCI-2 from the shipping container but do not remove its anti-static bag
until you are ready to install it. The packing materials may be retained for future shipment.
3. Verify that the catalog number of the NextMove PCI-2 you received is the same as the
catalog number listed on your purchase order. The catalog/part number is described in
the next section.
4. Inspect the NextMove PCI-2 for external damage during shipment and report any damage
to the carrier that delivered it.
5. If the NextMove PCI-2 is to be stored for several weeks before use, be sure that it is
stored in a location that conforms to the storage humidity and temperature specifications
shown in section 3.1.1.
2.2.1 Identifying the catalog number
NextMove PCI-2 cards are available with different specifications. As a reminder of which card
has been installed, it is a good idea to write the catalog number in the space provided below.
Catalog number:
PCI201-_______
Installed in: ________________________
Date: ______
A description of a catalog number is shown here, using the example PCI201-504:
Catalog
number
Meaning
PCI201 NextMove PCI-2 family
50 PNP digital outputs; 51 indicates NPN digital outputs.
4 Number of physical axes (up to a maximum of 8).
An expansion card is available to allow a further 4 axes to be controlled by the NextMove PCI-2.
See section A.1.1.