Installation manual

www.baldormotion.com
C-6 Mint Keyword Summary MN1933
Keyword Description
FASTAUXLATCHMODE Sets the default action to be taken to clear the auxiliary
encoder’s fast position latch.
FASTAUXSELECT To select which of the fast position capture inputs will capture
an auxiliary encoder channel.
FASTENABLE Manually clears the encoder’s fast position latch.
FASTENCODER To return the instantaneous encoder value that was recorded
on the fast interrupt.
FASTLATCH To read the axis fast interrupt latch.
FASTLATCHMODE To set the default action to be taken to clear the encoder’s fast
position latch.
FASTPOS To return the instantaneous axis position that was recorded on
the fast interrupt.
FASTSELECT To select which of the fast position capture inputs (or outputs)
will cause axis position to be captured.
FEEDRATE To set the slew speed of an individual move loaded in the move
buffer.
FEEDRATEMODE To control the use of slew speed, acceleration, deceleration
and feedrate override.
FEEDRATEOVERRIDE Overrides the current speed or feedrate being used.
FEEDRATEPARAMETER To set the parameters for the current speed or feedrate being
used.
FIRMWARERELEASE To read the release number of the firmware.
FLY To create a flying shear by following a master axis with
controlled acceleration and deceleration.
FOLERROR To return the instantaneous following error value.
FOLERRORFATAL To set the maximum permissible following error before an error
is generated.
FOLERRORMODE To determine the action taken on the axis in the event of a
following error.
FOLERRORWARNING Sets the following error threshold before an axis warning is
generated.
FOLLOW To enable encoder following with a specified gear ratio.
FOLLOWMODE To define the mode of operation of the FOLLOW keyword.
FREQ To set a constant frequency output.
GEARING To set the percentage size for gearing compensation.