Technical data

1 – upper compression ring; 2 – conic compression ring; 3 – oil ring.

Fig. 33 – Diagram of mounting the piston rings.

Set the timing gears according to the marks stamped on them as shown in Fig. 34. The

marks on the intermediate gear shall be aligned with the respective marks of the gears of the

crankshaft and camshaft, as well as fuel pump driving gear.

When assembling the air cleaner after washing it with the removal of the filter elements,

replace them into the housing in the following order: the filter element made of the thread with the

diameter of 0.007 in (0.18 mm) first; with the diameter of 0.009 in (0.24 mm) – second and with

the diameter of 0.016 in (0.4 mm) – third.