Operation Manual

30
Adjusting your camera settings
Open the Setup Menu
Press the ON/MODE button until the Setup Menu
appears on the display.
Formatting
It is possible to format your camera memory. In
the Setup Menu select Format and press the Select
button. Select Yes in the Formatting Menu and press
the Select button (SEL/OK) again. This deletes all
images and settings.
Set AutoOff time
Select AutoOff and press the Select button (SEL/
OK). Select the time after which you would like
the camera to switch off automatically if left un-
attended.
Adjust frequency
You can manually adjust the frequency to reduce
image fl icker under tungsten light when in the
Video Mode. Select Frequency and press the Select
button (SEL/OK).
Select between
50 Hz and 60 Hz and confi rm your
setting with the Select button.
Use the Up or Down button to select one of the
following options:
Switch off
Select the option Power Off and press the Select
button (SEL/OK) to switch off the Camera Module.
Setup
Power Off
Format
Auto Off
Frequency