User Guide

EN-71
Photography Menu (Function tab)
1. Slide the mode switch to [ ] and set the mode dial to one of
the photography modes.
2. Press the MENU button, and select the
[Function] menu with the X button.
J The [Function] tab of the photography menu is displayed.
3. Select the desired [Function] option item with the S / T buttons,
and press the SET button to enter its respective menu.
4. Select the desired setting with the S / T buttons, and press the
SET button.
5. To exit from the photography menu, press the MENU button.
Capture Mode
This sets the recording method at the time of capturing images.
*[Blank] Single: Capture an image at a time.
*[
] Continuous: Permits continuous photography of 3 images max.
*[AEB] AEB: Permits 3 consecutive images in the order of standard exposure, underexposure and
overexposure compensation.
*[
] Burst: The “Burst” capture mode allows you to fully use the available memory capacity (internal
or via memory card) by pressing and holding the shutter button. As long as you hold the
shutter button pressed, pictures are captured until the memory capacity is exhausted.
*[
] Burst+flash: The “Burst+flash” capture mode lets you shoot a sequence of 3 pictures with flash.
*[ ] Pre-Shot: Pre-shot helps you get the background you want, even if you need to ask someone else to
record the image for you. Basically, Pre-shot is a two-step process.
*[
] Coupling Shot: The Coupling Shot mode lets you record images of two people and combine them into a
single image. This makes it possible for you to include yourself in group images, even when there is no
one else around to record the image for you.
J In [Continuous], [AEB], [Burst], [Burst + flash], [Pre-Shot] and [Coupling Shot] capture mode,
the voice memo is automatically fixed at [Off].