User Guide

EN-58
Protecting Images
Set the data to read-only to prevent images from being erased by mistake.
Protecting Images
1. Slide the mode switch to [
].
2. Select the image that you want to protect with the W / X buttons.
3. Press the MENU button.
J The playback menu is displayed.
4. Select [Protect] with the S / T buttons, and press the SET button.
5. Select [Single] or [All] with the S / T buttons, and press the
SET button.
6. Select [Set] with the S / T buttons, and press the SET button.
J Protection is applied to the image and the camera returns to
the playback mode.
J The protect icon [ ] is displayed with protected images.
When [All] has been selected, [
] is displayed with all the images.