User Guide

EN-63
User’s Manual >>
Photography Menu (Function tab)
1. Slide the mode switch to [ ] and set the
mode dial to one of the photography modes.
2. Press the MENU button, and select the
[Function] menu with the X button.
The [Function] tab of the photography
menu is displayed.
3. Select the desired [Function] option item
with the S /T buttons, and press the
SET button to enter its respective menu.
4. Select the desired setting with the S/T buttons, and press the SET button.
5. To exit from the photography menu, press the MENU button.
Capture Mode
This sets the recording method at the time of capturing images.
*
[Blank] Single: Capture an image at a time.
*
[
] Continuous: Permits continuous photography of 3 images max.
*
[AEB] AEB: Permits 3 consecutive images in the order of standard
exposure, underexposure and overexposure
compensation.
* [
] Burst + flash The “Burst+flash” capture mode lets you shoot a
sequence of 3 pictures with flash.
* [
] Burst The “Burst” capture mode allows you to fully use the
available memory capacity (internal or via memory
card) by pressing and holding the shutter button. As
long as you hold the shutter button pressed, pictures
are captured until the memory capacity is exhausted.
Voice Memo
Refer to section in this manual titled "Recording Voice Memos" for further details.
* On / Off
When [Voice Memo] is set to [On], the preview setting is also fixed at [On].
In [Continuous], [AEB], [Burst + flash] and [Burst] capture mode, the
voice memo is automatically fixed at [Off].