User Guide

EN-23
User’s Manual >>
Turning the Power On/Off
1. Load the battery or connect the AC
power adapter to your camera.
2. Press the POWER button to turn on
your camera.
The status LED lights green and the
camera is initiated.
When the power is turned on, the
camera will start in the mode that is
currently selected.
3. To turn off your camera, press the
POWER button again.
The power is turned off automatically when the camera has not been
operated for a defined period time. To resume the operation condition,
turn the power on again. Refer to section in this manual titled “Auto Off”
in the Setup Menu (Basic tab) for further details.