User Guide

EN-51
Setup Menu
Set your camera’s operating environment.
1. Press the S / button and access the setup
menu with the X button.
2. Select the desired option item with the S / T
buttons, and press the OK button to enter
its respective menu.
3. Select the desired setting with the S / T
buttons, and press the OK button.
Date/Time
This sets the date and the time.
Refer to section in this manual titled “Setting the Date and Time” for further details
Format
Erases all images and reformats the SD card loaded in your camera. Protected
images are also erased. SD card cannot be formatted if it is write-protected. Refer to
section in this manual titled “Formatting an SD Memory Card or Internal Memory” for
further details.
Beep
This sets whether or not to mute the camera sound each time you press the camera button.
* On / Off
Language
Refer to section in this manual titled “Choosing the Screen Language” for further details.
Auto Off
If no operation is performed for a specific period of time, the power to the camera is
automatically turned off. This feature is useful to reduce battery wear.
* 3 Min./ 5 Min./ 10 Min./ Off
Sys. Reset
This returns all basic settings to the camera’s default settings. The time setting will
not be reset.
* Cancel / Execute
System Info.
This displays the current firmware version of the camera.