User Guide

EN-32
To Cancel the Protection
To cancel protection for only one image, display the image that you want to remove
the image protection.
1. Select [Protect] with the S / T buttons from the playback menu, then press the
OK button.
2. Select [Single] or [All] with the S / T buttons, then press the OK button.
3. Select [Cancel] with the S / T buttons, then press the OK button.
J Press continuously the W button to return to the playback mode. The removal
of image protection has been executed.
Protecting Selected Images
1. Select [Protect] with the S / T buttons from the playback menu, then press the
OK button.
2. Select [Select] with the S / T buttons, then press the OK button.
J The images are displayed in the thumbnail display.
3. Select the image you want to protect with the S / T / W / X buttons, then press
the OK button.
4. If you want to cancel the protection of selected image respectively, follow the
steps mentioned in “To Cancel the Protection” above to set.
Protecting Images/Video Clips
Set the data to read-only to prevent images
from being erased by mistake.
Protecting Images
1. Press the [ ] button.
2. Select the image that you want to protect
with the W / X buttons.
3. Press the S / button.
4. Select [Protect] with the S / T buttons, then press the OK button.
5. Select [Single] or [All] with the S / T buttons, then press the OK button.
6. Select [Set] with the S / T buttons, then press the OK button.
J Press continuously the W button to return to the playback mode.
J The protect icon [ ] is displayed with the protected image.
J Formatting an SD memory card overrides protection, and erases all images
regardless of their protected status.