User Guide

EN-17
GETTING STARTED
Turning the Power On/Off
Load the batteries and insert an SD memory
card before starting.
J To turn the power on, push and hold the OK
button until the camera turns on.
J To turn the power off, push and hold the OK
button until the camera turns off.
Choosing the Screen Language
Follow the steps below to choose the desired language.
1. Push and hold the OK button until the camera
turns on.


 The camera mode (default preview) is
displayed.
2. Press the S / button and access the setup
menu with the X button.


 In the video [ ] mode or playback [ ]
mode, you may also follow the step above
to access the setup menu.
3. Select [Language] with the S / T buttons, then press the OK button.


 The Language setting screen will be displayed.
4. Select the displayed language with the S / T buttons, then press the OK button.


 The setting will be stored.
5. To exit from the menu, press continuously the W button.
Ex.: In Camera Mode
J The power is turned off automatically when the camera has not been operated
for a fixed time period. To resume operation, turn the power on again. Refer to
section in this manual titled “Auto Off” in the Setup Menu for further details.