User Guide

VIDEO MODE

This option allows you to view your images on a TV. Connect the camera to your

TV via the video cable connection first. Then select the video output format by

using the / button and press the ENTER button.

[NTSC] : select this format when located in the U.S.A., Canada, Japan, Korea,

Taiwan, Central America, Mexico, etc.

[PAL] : select this format when located in Australia, Austria, Belgium, China,

Denmark, Finland, Germany, Great Britain, Holland, Italy, Kuwait,

Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,

Thailand, Norway, etc.

AUTO POWER OFF

In case no activities are carried out for a certain period of time while powered on,

the camera stays idle or turns off automatically to conserve power.

Inactivity period Inactivity period Camera status

(batteries) (AC power adapter)

90 seconds 90 seconds stay idle

3 minutes 30 minutes shut off

To activate the camera again while stayed idle, press any button or switch the

mode dial. If the camera is shut off automatically, you need to turn the camera on

again by sliding the POWER switch. The table above shows the default settings

of auto power off. You can change the setting by using the / button and then

press the ENTER button.

[3 min], [5 min], [10 min], [30 min]