User Guide

EN-11

GETTING STARTED

Preparation

1. Attach the camera strap.

2. Open the battery/memory card cover.

3. Insert the supplied battery with correct orientation as shown. (label side back)

4. Insert an SD/SDHC memory card (Optional).

 The camera has 32MB internal memory(10MB available for image storage), but

you can load an SD/SDHC memory card to expand the camera’s memory

capacity.

 Be sure to format the memory card with this camera before its initial usage.

5. Close the battery/memory card cover and make sure it is locked securely.



To prevent valuable data from being accidentally erased from an

SD/SDHC

memory card

, you can slide the write protect tab (on the side of the

SD/

SDHC

memory card) to “LOCK”.

 To save, edit, or erase data on an SD/SDHC memory card, you must

unlock the card.

 To prevent damaging of an SD/SDHC memory card, be sure to turn off

the power when inserting or removing the SD/SDHC memory card. If inserting or removing the

SD/SDHC memory card with the power on, the camera will automatically turn off.

Charging the Battery

The battery is not fully charged at the time of purchase. Fully charge the battery and

discharge it for at least one complete cycle before use to maximize its performance and

lifetime.

1. Connect camera to AC/DC adapter with USB cable.

2. Insert the plug into a wall outlet.

 The included AC/DC adapter differs depending on the region where you purchased the camera.

 User can also charge the battery by connecting camera to computer with USB cable.

 Charging time varies according to the ambient temperature and the status of battery.

Status LED Description

Orange (blinks slowly) Charging normally

Orange Charging finished

Orange (blinks quickly) Error