User Guide

EN-29
White Balance
This sets the white balance for a variety of lighting conditions and permits images to be
captured that approach the conditions that are seen by the human eye.
* [ Blank ] Auto
* [ ] Incandescent
* [ ] Fluorescent 1
* [ ] Fluorescent 2
* [ ] Daylight
* [ ] Cloudy
* [ ] Manual
Sharpness
This sets the sharpness of the image that will be captured.
* Hard / Normal / Soft
Saturation
This sets the saturation of the image that will be captured.
* High / Normal / Low
Metering
This sets the metering method for calculating the exposure.
* [ ] Average: Averages the light metered from the entire frame, but gives greater weight
to the subject matter at the center.
* [ ] Spot: A very small portion of the center of the screen is measured to calculate the
correct exposure.
* [ ] Multi: The entire area of the screen is measured, and the exposure is calculated.
Manual WB
This manually sets the white balance and stores it. Use of this is convenient when the white
balance does not offer a good match.
Before selecting [Execute] and before taking your image, place a white paper in the scene and
set the white balance manually.
* Cancel / Execute
Capture Mode
This sets the recording method at the time of capturing images.
* [ ] Single: Captures one image at a time.
* [ ] Continuous: Permits continuous capture of up to 3 images.
* [ ] AEB: Permits 3 consecutive images in the order of standard exposure,
underexposure and overexposure compensation.
* [ ] Burst: Permits continuous photography while keeping the shutter button pressed
down. As long as you hold the shutter button pressed, pictures are captured until
the memory capacity is exhausted.
* [ ] Cont.flash: The “Series + flash” capture mode lets you shoot a sequence of 3
pictures with flash.
* [ ]
Pre-Shot: Pre-shot helps you get the background you want, even if you need to ask
someone else to record the image for you. Basically, Pre-shot is a two-step process.
* [ ] Coupl.shot:This mode lets you record images of two people and combine them into a
single image. This makes it possible for you to include yourself in group images,
even when there is no one else around to record the image for you.
* [ ] Album Shot: Creates an album-like layout to combine 3 shots into a single image.
1
2