User Guide
EN-27
Erasing Images
Erasing in Photography Mode (Quick Delete Function)
The quick delete function enables you to delete the last-captured image during capture.
1. Slide the mode switch to [ ] or [ ].
2. Press the button.
The last image and quick delete menu appear
on the screen.
3. Select [Execute] with the c / d buttons.
4. Press the SET button to confirm the deletion.
To not delete, select [Cancel], and press the
SET button.
Erasing single image / Erasing all images
1. Slide the mode switch to [ ].
The last image will be displayed on the screen.
2. Select the image you want to erase with the
e
/
f
buttons.
3. Press the button.
The deletion menu will be displayed.
4. Select [Single] or [All] with the c / d buttons, and
press the SET button.
[Single]: Erases the selected image or the last
image.
[All]: Erases all of the images except for the
protected images.
5. Select [Execute] with the c / d buttons, and
press the SET button.
To not erase, select [Cancel], and press the
SET button.
Deleting an image will not affect sequential image numbering. For example, if you delete
image number 240, the next captured image will be numbered 241 even though 240 no
longer exists. In other words, an image-number is retired when an image is deleted and
will not be reused or reassigned to another subsequently captured image.
Delete
SET:Enter
MENU:Exit
Delete
MENU:Exit
SET:Enter