User Guide

EN-53
Attaching Voice Memos
A maximum of 30 seconds of audio can be recorded like a memo annotation for each still image. The
voice memo can be recorded only once.
1. Slide the mode switch to [ ].
J The last image appears on the screen.
2. Select the image where you want to attach the voice memo with the W / X buttons.
3. Press the MENU button.
4. Select [Setup1] with the X button.
5. Select [Voice Memo] with the S / T buttons, and press the SET button.
6 Select [On] with the S / T buttons, and press the SET button.
7. Press the MENU button to exit from the menu.
8. Press the shutter button.
J [VOICE RECORDING] is displayed on the screen and recording starts.
9. To stop recording voice memo during recording, press the shutter button again.
J [VOICE RECORD END] will be displayed and the recording will end.
J A [ ] is displayed with images that have been recorded with a voice memo.
Playing back voice memo
Pressing the SET button displays [VOICE PLAYBACK] and plays back the voice memo. Pressing it again
stops voice memo playback.
J Voice memo is only available for still images.
J If a voice memo has already been recorded (either by dub recording or attaching voice
memo afterwards), the voice memo can not be replaced or recorded again.