User Guide

EN-46
[ ] Panorama Mode
This mode is designed to make it easier to capture a series of shots then stitch them together with
software to make a single image. You can capture a photographic subject that won’t fit into a single
frame, such as a landscape, and stitch it together later with a program such as Cool 360 or Photoshop
application.
1. Slide the mode switch to [ ] and set the mode dial to [ ].
2. Shoot the first image.
J The next image appears beside the previous image.
3. Orient the camera so that the second frame overlaps a small
portion of the photographic subject of the first image and press
the shutter button to capture the next image.
4. Follow the same steps to capture subsequent images in the
sequence.
5. Finish the sequence by pressing the SET button after the last
image has been recorded.
[ ] Anti-Shake Mode
The anti-shake function works according to the luminance of the target object. This function uses special
image data processing for getting high sensitivity of CCD. High sensitivity can use higher shutter speed
compared with normal mode, so it reduces influence of hand shaking. From the resolution point of view,
it becomes worse than normal mode. Maximum size of image becomes 6 megapixels (2816 x 2112).
1. Slide the mode switch to [ ] and set the mode dial to [ ].
2. Compose the image, press the shutter button down halfway,
then press it down fully.