User's Manual

24
adapterwillbemounted.Attachtheadhesivesideof
theotherVelcrohalftotheadapterandthenpress
theadapterfirmlyontothehelmet,bringingthetwo
Velcrohalvestogether.Slidethemountingbracket
(6)onthebottomoftheactioncamontotheadapter
untilyouhearanaudibleclick(seeFig.7).Carefully
movethecameraandhelmetfromsidetosidetoen-
surethatthecameraisfirmlyinplace.
Mounting the camera using the Velcro strap*
Insertthestrapintooneoftheopeningsoftheadapt-
erwiththeVelcrosideup,ensuringthatthestrapruns
underneaththemountingadapter.Pullthestrapup
andthroughtheothersideoftheadapter.Pullthe
strapthroughtheopeningsuntilthebuckleisposi-
tionedsnuglyagainsttheadapter.
Positiontheadapteroverthecentreofthehelmetand
insertthestrapthroughoneoftheventilationopen-
ings.Pullthestrapupandthroughaparallelventila-
tionopeningandthenthroughthebucklenearthe
mountingbracket–besurethatthecameraisaligned
verticallyandascentralaspossibleonthehelmet.
TightlyfastentheVelcrosidesofthestraptogether
toavoidanyunnecessarymovementofthecamera.

Fig.8
Fig.10
Fig.12 Fig.13
Fig.9
Fig.11