User's Manual

22
Fig. 1 Fig. 2
also ensures a steady positioning of the binoculars
against the eye and minimizes stray light. When look-
ing through your MINOX BN 7x50 C II DSV wearing
glasses you must fold down the rubber eyecups to
enable you to see the entire field of view right into
the edges.
Warning: Do not use your MINOX binoculars to look
at the sun or other bright sources of light to prevent
any eye injury.
Attachment to a tripod mount
To ensure steady and fatigue-free viewing you can
mount your MINOX BN 7x50 C II DSV on a tripod using
the tripod thread integrated in the body. For this pur-
pose we recommend the MINOX tripod mount (order
number 80405832) that is available from our range
of accessories.
To use the tripod mount first remove the cap screw (7)
from the tripod thread on the underside of the MINOX
BN 7x50 C II DSV. Connect the MINOX tripod mount to
the thread turning it in clockwise direction.
Keep the cap screw (7) in a safe place and screw it
back into the tripod thread after removing the tripod
mount.
Inserting and changing the batteries
Your MINOX BN 7x50 C II DSV has a compass with a
display that can be illuminated in the dark at the press
of a button. For this the compass requires two batter-
ies of the type LR 43.
To insert or replace the batteries proceed as follows:
1. Open the screw cap on the battery compartment
on the bottom of the binoculars by turning it in
counterclockwise direction (Fig.1)
2. Take the old batteries out of the battery compart-
ment. (Fig. 2) and insert two new batteries of type
LR 43 in the battery compartment (pay attention
to correct poling).
3. Tighten the screw cap on the battery compartment
again by turning it in clockwise direction.