User manual

46
Auto Electroflash 200X and 132X
Both the Auto Electroflash 200X and 132X
are new generation automatic-type flash units
that have been specially designed for use with
the XG-9 camera system.
After either Electroflash is attached, all you
need to do is select any automatic setting or
manual shutter speed, set the proper lens
aperture , and turn the flash on. When its
capacitor is fully charged, the unit starts a
flash-ready signal blinking in the viewfinder and
electronically switches the camera to X-sync.
when the shutter is released.
While
the capacitor of either unit is charging
and the monitor lamp is off, the flash wi ll
automatically switch the camera's shutter back
to its indicated setting. At this time metered
automatic or full manual exposures can be
made. Flash mode will resume when the
capacitor is charged and the flash-readY signal
blinks .