User manual

Main switch
To operate the camera, move the main
switch to "ON ." This allows current to flow to
the Touch switch/operating button . The main
switch also serves as the self-timer and battery
check switch.
To prevent accidental exposures and need·
less battery drain, always be sure to move the
main switch to "OFF" when not using the
camera .
Touch switch/operating button
Finger contact with the Touch switch/-
operating button activates the camera's elec -
tronic circuit and when the shutter-speed/-
function selector is set at "A" (automatic) ,
powers the electronic exposure control and
LED circuits. If proper contact with the touch
switch is not possible (i.e., while wearing gloves
or when fingers are dry), slight pressure on the
button will also activate the camera.
13