User manual

BATTERIES AND POWER
Two 1.5·volt silver-oxide batteries, Eveready
S·
76 or equivalent, supply the power for the
meter, electronic exposure control , elec·
tromagnetic release, electronic
shutter settings,
and LED indication.
CAUTION
• The
shutter will not release when the
operating button is pushed if : battery power
is too low; the operating switch is at
"OF F ," exposure conditions exceed the
range of the automatic exposure system.
• Do
not use 1. 3v mercury batteries, Eveready
EPX·675
or equivalent, which have a similar
shape.
NOTE
•
If the camera is not be used for more than
two weeks, it is advisable to remove the
batter ies.
• Fresh spare
batter ies may be stor ed in the
battery holder provided with the camera
strap.
Installing batteries
1. Using a coin
or similar object , turn the
battery - chamber cover counterclockwise
and remove it.
2.
After wiping terminals with a clean dry
cloth and handling only by the edges, insert
two of the specified batteries plus (+) side
out into the sleeve on the inside of the
cover. (I f batteries are inserted improperly,
they will not make contact, and no curr e nt
will flow.)
11