User`s guide

Scanning With the Machine
147
Selecting the Scan Mode
" These settings are available only if BW Only was selected for the
color setting.
1 In the main screen, press the + or , key to select the current scan quality
setting, and then press the Select key.
2 Press the + or , key to select MODE, and then press the Select key.
3 Press the + or , key to select MIX, TEXT or PHOTO, and then press the
Select key.
The main screen appears again.
Selecting the Scan Density
1 In the main screen, press the + or , key to select the current scan quality
setting, and then press the Select key.
2 Press the + or , key to select DENSITY, and then press the Select key.
3 Press the * or ) key to select the desired scan density.
As the indicator is moved to right, the density becomes darker.
Setting Duplex (Double-Sided) Scanning
Double-sided document pages can be scanned with the ADF.
" These settings are available only if the document is loaded in the ADF.
If the document is scanned without being loaded in the ADF, 1-SIDE
is automatically selected, and the document is scanned from the origi-
nal glass.
" This setting is available only if PDF is selected as the data format for
the scan image.
1 In the main screen, press the + or , key to select the current simplex/
duplex (single-sided/double-sided) setting, and then press the Select key.
2 Press the + or , key to select 2-SIDE, and then press the Select key.
3 Press the + or , key to select LONG EDGE or SHORT EDGE, and then
press the Select key.
The main screen appears again.
" For details on LONG EDGE and SHORT EDGE, refer to “Duplex
(Double-Sided) Copying From the ADF” on page 117.