Troubleshooting guide

MODEL IC#
V
ERSION Reference COMMENTS Updated by
Please See
Page 05
IC-307 Software ver 1.1 System Software version 1.1
CREO
SERVE
R
Patch
IC-307_V1.1_KM_Logo
Patch
Brings the Konica Minolta logo into Sample files that are on the Sample Files folder.
Patch
IC-307_V1.1_Vivid Patch
Supports the enhanced High Chroma Color capabilities of the bizhub PRESS C70hc
Patch
IC-307_V1.1_Smoother
Vignette_VP Patch
When processing files that include vignettes, the vignettes might not be smooth enough
Patch
IC-307_V1.1_PS Overprint
Off Patch
In APPE RIP flow, the PS Overprint commands are not honored, even when the
Postscript overprint option is selected in the job Parameters.
Patch
IC-307_V1.1_80PPM
Finishers Patch
Allows printing up to 350 gsm paper weight into the Stacker Finisher Main Tray.
Patch
IC-307_V1.1_70-60PPM
Finishers Patch
The patch solves 3 issues:
1) Custom paper size couldn't be sent to Perfect Binder Main Tray.
2) Banners (330x1200mm) cannot be printed to the Stapler Finishers Sub Tray.
3) RU is displayed on the GUI also when it is not connected.
Patch
IC-307_V1.1_80PPM
Mac10.7 RWS Patch
When installing Remote Workspace application on MAC 10.7, a failure message may
appear when the installation is finished.
Patch
IC-307_V1.1_70-60PPM
Mac10.7 RWS Patch
When installing Remote Workspace application on MAC 10.7, a failure message may
appear when the installation is finished.
Patch
IC-307_V1 1_Profiling
Tool Patch
In the Profiling Tool, when you click Print to print the color measurement chart to a tray
that is already mapped to a defined paper profile, an error message appears.
CREO
Page 97 of 126