Troubleshooting guide

MODEL IC# VERSION Reference COMMENTS Updated by
Please See
Page 05
bizhub 552 MFP Controller A2WU0Y0-0100-G00-F7 3DEF VER F7 8
OpenAPI v 3.7E
MFP Controller
A2WU0Y0-0100-G00-F3 9180 VER F3
MFP Controller
A2WU0Y0-0100-G00-F2 77A5
VER F2 ** Previous ver.
bizhub 600 MFP Controller
57AA-0100-G00-30-000 ver 32 7, 8
Image Controller 57AA-0100-G00-31-000 Firmware performed through a USB Flash Drive
Operation Panel Message 57AE-8100-G00-20-000 [use 128MB, 256MB or 512MB USB Flash Drives]
C1 57BA-8201-G00-31-000 Recommended: Buffalo Clip Drive Model- RUF-C128ML/U2
C2 57BA-8202-G00-31-000 Buffalo Clip Drive Model- RUF-C256ML/U2
C3 57BA-8203-G00-32-000 Transcend JetFlash Model- TS-256MJF2A
C4 57AA-8204-G00-30-000
C5 57AA-8205-G00-30-000
Note: Once updating the bizhub 750/ 600 to ver. 30, never downgrade
FK-502 15LA-0040-G02-12-000 to ver. 25 and ver. 20 or earlier.
FS-504/FS-602 15JK-0071-G00-20-000 This is due to the extensive program configuration changes.
FS-505 15JL-0071-G00-20-000 It can be downgraded from ver. 30 to ver. 21 only
Punch & Z-Fold Unit 15KV-0071-10
IC-202 Printer Controller 57AA-3000-G00-32-000
ver 32 Performed while Upgrading through ISW
MFP Controller 57AA-0100-G00-25-000
ver 25 ** Previous ver.
MFP Controller
57AA-0100-G00-20-000
ver 20 ** Previous ver.
MFP Controller
57AF-0100-G00-17-000
ver 17 ** Previous ver.
Konica Minolta Black and White Models
Page 59 of 126