Troubleshooting guide

MODEL IC# VERSION Reference COMMENTS Updated by
Please See
Page 05
IC-413 Controller ver 1.0
System Software ver 1.0 Fiery E100 70-60C-KM
Update System Software
Patches
1-19H0E0 install in order Corrects Paper Profile issues
Patches 1-19QIXT install in orde
r
Corrects Paper Profile issues
Patches 1-A2SSM Corrects Garbled Images
Patches 1-1AF7YI Corrects PDF Rendering
Patches 1-19QIW9 Reset to Factory should reset Paper Catalog to default.
Patches 1-1ASJ0L Unable to output job with custom size 12.5x19 to Stapler Main Tray.
Patches
1-18LDJR
Allow KM Remote Care to identify IC-413 / Fiery E100 70-60C-KM
Patches
1-1ASOL5
Direct Mobile Printing (AirPrint) from Apple iOS 4.2.x or later is enabled. This
patch is directly supported by EFI, not KMBT.
(KMBT do not support it.)
Patches 1-1BKBVE
GRACoL2006 Coated1 (EFI) is set as default setting instead of ISO Coated
FOGRA39L.
Patches 1-1BCHDK System update fails with Error 10
Patches 1-1ACPDR Resolve variation in CMYK or Grayscale Processing Method
Patches 1-1BX4AW Fiery crashes when more than 20 calibration sets are created.
Patches 1-QRIU1
change MIB from Generic ver. to Konica Minolta ver. in order to
connect PageScope applications that support bizhub pro/press
printers.
Patches
1-1BDLWV
Corresponded to "Fiery does not come up to idle and the LED stays
at AA." and "Fiery boots up with FATAL:
Assertion Failed error message"
Patches
1-1BOG1
Corresponded to “Fiery crashes due to multiple network conditions.”
Patches
1-1CQYII
Corresponded to “Sending a print job while ADF is jammed results in
an engine error C6704”
Patches
1-1CU0M5
Corresponded to “Mixed Media insert tabs will cause the job to be
ripped entirely before printing”
Patches
1-1CW7ID support of 257-301gsm by LS-505
Supported Models: C6000, C7000
IC-601
Controller ver 1.0
Update
Supported Models: C8000
Color Fiery Print Controllers
Page 44 of 126