Troubleshooting guide

MODEL IC# VERSION Reference COMMENTS Updated by
Please See
Page 05
IC-409 Controller ver 1.01
System Software ver 1.01 Fiery X3eTY2 50_45C-KM
Patches
1-W5C85 1
Fixes Various Errors **Install first
Patches 1-XL217 2 corrects the Power Saver issue
Patches
1-ZB8PP 3 Waking up from Power Save, Fiery goes through the wakeup cycle twice
Patches 1-Z5Q9E 4 Unable to print after MFP is in Power Save mode with a local AppleTalk zone.
Patches 1-105NZD 5 Patches to disable and re-enable Fiery sleep mode.
Patches 1-UIG65 6 Printing Negative Image Instead of B/W
Patches ProID Product Identifier Patch
Patches 1-V1NZ Print without Authentication
Patches 1-VRY88 Allows MAC OS X 10.5 Driver to be available. [See Drivers section]
Patches 1-WA4ZQ When ZU-603 is installed, conflict is generated.
Patches 1-VLROP Engine Network ID does not appear on Configuration Page in DHCP Mode.
Patches 1-XA7M0 All pages except pages is rotated from InDesign on MAC
Patches
1-ZAG86 Apache Server Update /version change 1.3.37 to 1.3.41.
Patches
1-10J8K9 WebUpdates are not filtering out patches already installed on the system
Patches
1-119HPB When printing many small files, CWS does not update status window
Patches
1-13YDY3 Printing A3 or 11x17 with Z-fold and Staple=Off result in Job Error.
Patches
1-1BJISL Samba upgrade to address Memory Corruption vulnerability issue.
*
Must Install in the Order listed. (Critical Patches).
Supported Models: C253, C353, C353P, C451, C550, C650
Color Fiery Print Controllers
Page 42 of 126