Troubleshooting guide

MODEL IC#
V
ERSION Reference COMMENTS Updated by
Please See
Page 05
IC-306 Controller ver 2.0 System Software Fiery PRO80 80C-KM ver 2.0 (for C8000)
Controller ver 2.0 System Software Fiery PRO80 70-60C-KM ver 2.0 (for C6000/ C7000)
Patches
1-1AWKJ8
Direct Mobile Printing (AirPrint) from Apple iOS 4.2.x or later is enabled. This
patch is directly supported by EFI, not KMBT.
(KMBT do not support it.)
Patches 1-1BX57A
Fiery crashes when more than 20 calibration sets are created.
Patches 1-BNSKP Fiery boots up with "FATAL: Assertion Failed" error message.
Patches
1-1CW68K support of 301-350gsm by LS-505.
Patches
1-1CQYK8
Corresponded to “Sending a print job while ADF is jammed results in
an engine error C6704
Engine LCD does not reflect the changes after doing Remove
Association from CWS.
Patches 1-1CTU5P
Corresponded to “Mixed Media insert tabs
will cause the job to be ripped entirely before printing.”
Unable to output custom size (12.5x19) to Stapler (FS-521) Main
Tray. PreRequisites: 1-1CQYK8
Supported Models: C6000, C7000, C8000
Color Fiery Print Controllers
Page 35 of 126