Troubleshooting guide

Model Name Program Version Note
Konica Minolta 7085 Print Control 20 Use most Current Base Firmware
C1 18-0000
C2 11-0000
C3 14-0000
C4 11-0000
Image Control 44-0000
Operation 01 43-0900
02 43-0000
03 43-0000
04 43-0000
05 43-0000
RADF 11-000
Finisher N 13
FS-111/FS-211 FNS Control 15
PU-108/PU-109 Punch Unit 32
PZ-108/PZ-109 Punch+Z-Fold 40
VI-602
Video I/F Board 12-0000
IP-602/IP-602M Printer Controller NOA 26.5.0 Need to change the Base Port number to 9100.
NIC ROM ver.6.26A This can be performed via the Web Utility Page
KN-306 6.34a for Netwrok Setup.
However, the System password will be required
to make this modification.
The modification can be verified via the 7085
driver as 9101.
Refer to the
"How to Use Web Utilities [7085/IP-602]
to Obtain Configuration
Note: Do not install any earlier firmware versions than those listed above.
Rev. Oct. 01, 2008
Note- The Printgroove POD driver and Queue client software are resident on the Printgroove server.
Most of the Printgroove updates usually include new versions Printgroove POD driver and Queue client software.
The customer should always perform an “Add Remove” programs on their PC to remove the previous versions, reboot their PC, then download and install the new ones.
The customer should always download and use the versions that come with the server as they are designed to work with the version of Printgroove that they come with.
Page 104 of 126