Troubleshooting guide

Model Name Program Version Note
bizhub Pro C500 Print Control
12-0000 12
-
PBD0
Use most Current Base Firmware
Image Control
13-000
14-CNO0
Operation
12-000
FS-513/FS-606 FNS Control 10-000
IP-901 Printer Controller
ver. 2.0
System 6 SP1
PostScript language is required.
IC-302 Printer Controller
ver. 2.1 System
6 SP1
Need to provide User ID and Password in
IC-405 Printer Controller
ver. 2.0
or later System
8e
order to print from Printgroove POD Queue
IC-301 Printer Controller
ver. 1.0 SP2
Model Name Program Version Note
Konica Minolta 8050 Print Control 51-0000 Use most Current Base Firmware
Image Control 51-0000
Operation 50-0000
FS-115/FS-215 FNS Control 16-0000
IP-901
Printer Controller
ver. 2.0
System 6 SP1
PostScript language is required. Need to
provide User ID and Password in order to print
from Printgroove POD Queue
Note:
Do not install any earlier firmware versions than those listed above.
Rev. Oct. 01, 2008
Note- The Printgroove POD driver and Queue client software are resident on the Printgroove server.
Most of the Printgroove updates usually include new versions Printgroove POD driver and Queue client software.
The customer should always perform an “Add Remove” programs on their PC to remove the previous versions, reboot their PC, then download and install the new ones.
The customer should always download and use the versions that come with the server as they are designed to work with the version of Printgroove that they come with.
Page 103 of 126