User`s guide

bizhub 215 7-4
7.1 How to scan originals
7
2 Connect a USB memory to this machine.
The machine mode changes to scan mode and [TO: Scan to USB Memory] is displayed.
% By pressing ,, file format, and compression coding method can be set. For details, refer to
page 7-6.
3 Press the Start key.
4 Press +,, then select [AUTO DETECTION] or [MANUAL].
% If [AUTO DETECTION] is selected, press OK and go to Step 8.
% If [MANUAL] is selected, scanning size can be selected. Press ) and go to Step 6.
5 Press +, to select desired scanning size, then press OK.
% By pressing [INCH] or [METRIC], the scanning size unit can be changed.
6 Press OK.
7 Check the content of setting, then press OK.
Scanning starts and [NEXT PAGE?] is displayed.
% When scanning multiple sheets of the original, set the next original on the Original Glass, then press
OK. Repeat the above procedure for all sheets of the original.
8 When all the originals have been scanned, press the Start key.
Storage starts.
Tips
- To stop scanning, press Clear/Stop.
- If you are unable to send data, the TX Result Report is output.