User`s guide

bizhub 215 7-2
7.1 How to scan originals
7
7 How to Use Scan to USB
This chapter describes how to store scanned data on the USB memory.
7.1 How to scan originals
7.1.1 When using the ADF
1 Place the originals to be stored in the USB memory on the ADF.
% The maximum number of originals that can be placed at one time into the ADF is 70. Do not set orig-
inals above the , mark.
% For details on how to set the original, refer to [User's Guide Copy Operations].
% For details on how to set a double-sided original, refer to page 7-3.
2 Connect a USB memory to this machine.
The machine mode changes to scan mode and [TO: Scan to USB Memory] is displayed.
% By pressing ,, file format, and compression coding method can be set. For details, refer to
page 7-6.
3 Press the Start key.
Scanned original is stored in the USB memory.