User`s guide

bizhub 215 5-6
5.2 Changing transmission setting
5
5.2 Changing transmission setting
The subject, CC address, file format, and compression coding method can be changed.
5.2.1 Setting subject
1 Press the Scan key.
% The machine switches to the scan mode.
2 Set the original and enter the destination address.
[OTHER SETTING=,] is displayed.
3 Press ,.
The other setting screen appears.
4 Press +, to select [SUBJECT], then press OK.
5 Enter the subject (title) of a mail to be transmitted, then press OK.
The screen returns to the other setting screen.
Tips
- A maximum of 20 characters can be entered.
5.2.2 CC address setting
1 Press the Scan key.
% The machine switches to the scan mode.
2 Set the original and enter the destination address.
% [OTHER SETTING=,] is displayed.
3 Press ,.
The other setting screen appears.
4 From the other setting screen, press +, to select [CC ADDRESS], then press OK.
5 Enter the E-mail address of the destination for CC'ing the message to, then press OK.
% To add other E-mail addresses, select [ADD], then press OK. Repeat the above procedure until all
concerned destinations are added.
% To check or correct the CC address entered, select [CHECK/EDIT], then press OK.
Tips
- A maximum of 254 addresses can be entered in the CC box.
Checking and Correcting CC addresses
1 In the [ADD] and [CHECK/EDIT] screen of CC Address, press +,, select [CHECK/EDIT], then press OK.
A list of the entered CC addresses is displayed.