User`s guide

bizhub 215 3-9

3.3 WIA driver

This section describes the functions of the WIA driver.

3.3.1 How to scan originals

Scanning is enabled using a WIA-compliant application. The operation method differs depending on the ap-

plication to be used. This section describes the operation by using Adobe Photoshop 6.0.

1 Set an original to be scanned on the ADF or Original Glass.

2 Start an application software (Adobe Photoshop, etc.) on the computer.

3 Click [File].

4 Select [Import], then click [WIA-KONICA MINOLTA <model_name> Scanner].

% If a message dialog appears, check the contents and click [OK].

5 Make the necessary setting for scanning.

% For details, refer to page 3-9.

6 Click [Scan].

Press this key to start scanning.

% To stop scanning, press the [Cancel] or Esc key.

3.3.2 Setting driver

No. Item Settings

1 [Paper Source] Select the scanning method. To use the ADF, select [Document Feed-

er]. To set to Original Glass, select [Flatbed].

2 [Color picture] Scans the original in color mode.

[Brightness]: 0

[Contrast]: 0

[Resolution]: 150

3 [Grayscale picture] Scans the original in gray scale mode.

[Brightness]: 0

[Contrast]: 0

[Resolution]: 150

4 [Black and white picture

or text]

Scans the original in black and white mode.

[Brightness]: 0

[Resolution]: 150

5 [Custom settings] Scans the original by adjusting the settings.

6 [Adjust the quality of the

scanned picture]

Image quality can be adjusted.