Operation Manual

FINAL SCAN
46
Twain Driver / Plug-in Software
Once all the desired adjustments have been made to the Prescan image and the Job or Scan
Settings have been entered, you are ready to scan the film.
With the Prescan image displayed in the Prescan window...
1. Click on in the Command window.
• The final scan will begin.
• When scanning is complete, the final scan will appear in the host
application’s window.
2. Save the image using the instructions for your
host application.
Utility Software
With the Prescan image displayed in the Prescan window...
1. Click on in the Command window.
2. Enter the desired file
name and select the file
destination.
3. Select the file type from the
drop-down list.
4. Click on .
• The final scan will begin.
• When scanning is complete, the scan will be
saved in the selected location. The software
will return to the Prescan window.
Your system’s standard save dialog box will appear.
3. Close the Control Window to exit the Dimâge Scan
Speed driver software.
• The driver window will close automatically after each scan if the Close Driver
After Scanning option was selected in the Preferences dialog box (p. 22).
5. Close the Control Window to exit the Dimâge Scan
Speed driver software.
• The driver window will close automatically after each scan if the Close Driver
After Scanning option was selected in the Preferences dialog box (p. 22).