Operation Manual

2
SYSTEM REQUIREMENTS – PC / AT
CPU:
Operating System:
Memory:
Monitor:
Other:
IBM PC/AT compatible with an i486DX-2 66MHz processor or
better. An Intel Pentium or later when Windows NT 4.0 is
installed.
• Support cannot be provided for custom or home built machines.
Windows 95 (incl. OSR2), Windows 98, or Windows NT 4.0.
A minimum of 32 MB RAM.
SVGA (800 x 600) or better. VGA can be used.
TWAIN driver is compatible with Photoshop ver. 3.05 and 4.0.1,
Paint Shop Pro 4.1E, Corel Draw 7, Corel Draw 8.
SCSI Board: The following Adaptec SCSI boards are recommended for this
device:
AVA-1505AE AHA-1520B AHA-1540CP
AHA-2940J AHA-2940U AHA-2940AU
AHA-2940W AHA-2940UW AHA-2910B
• The AHA-2940N SCSI board has been test and approved for use on
NEC PC-9821 series machines.
• Do not use AVA-1505AE, AHA-1520B, and AHA-1540CP SCSI
boards with NEC PC98NX Series machines.
• Support will not be provided for malfunctions or problems caused by
the use of untested SCSI boards.
Hard Disk Space: 90 MB of available hard disk space.