Instruction manual

QuickScan35 27
SCAN FLOW CHART
Place film in the film holder emulsion side down. Insert the film
holder to the scanner as indicated on the holder.
Select the type of film you are scanning in the Film Type pop-up
menu.
Click on PreScan to preview your image.
Focus, flip, crop, or rotate the image if necessary. Frame the
area you want to scan using the cropping frame. Click and hold
the Zoom Preview button to view the scanning area only.
Click on SCAN to scan the image.
If you are using the TWAIN Driver software save the file by
selecting Save As... from the File menu.
If you are using the QS Utility software, the Save dialog box will
appear. Enter a file name and select the location to save the file
to, then click on SAVE.
Specify Film Type
Focus and Framing
Scan
Film Eject
Click on EJECT to eject the film manually after you have
scanned the film. If you selected the Auto Eject check box, the
film will eject automatically after scanning is complete.
Save the File
Insert Film
Color Correct
Correct the color of your image if necessary using the slider
bars (Standard Color Correction Mode) or the RGB curves
(Professional Color Correction Mode).
1
2
3
4
5
6
7
8
Preview